Learn How To Flash Tablet Pc with Flashing Tools

Basic Training to Learn how to  flash ,Restore ,Upgrade ,Root ,all Android Tablets .Learn how to flash Android Tablet Pc.

This tutorial is specially for  newbies , 

There are few basic steps which is compulsory to start  flashing procedure for android tablets . A very basic steps which will allow you to flashing Tablets safely and smoothly . before starting you must install the drivers for tablets to let the computer know that device is connected. 

To install driver for android tablets, you must :

1. Make sure battery is up-to 60 % Charge.

2.Turn off your tablet .

3.Press and hold Volume Down "Volume -" button and insert USB cable which is already connected to your pc . 

4.While holding Volume down button press power button for 1 sec and release then press power button again for half sec and keep pressing it for half second until your computer recognize the tablet pc. 

5. For WIN XP user must install the Android Drivers in case of WIN 7 More then 50% devices drivers are available in WIN 7 , but in case no driver found or window take a lot of time to searching for drivers you must install manually . 

6. When device is connected go to properties of  My computer -->Hardware -->Device Manage  and make sure your tab is connected in USB Controller.

7. Make sure and done . Now you are ready to install complete firmware for your Tablet. 

Tablets with Allwinner Chipset flashed with Livesuit flashing tools and Tablets based on Rockchip must be flashed with Rkbatch Tool.

Note : In case of Device does not recognize by Pc  . Change the USB port . Restart your Computer or remove USB cable and try to turn on your android tablet simply (normal mode) and reconnect the cable .